Home » Products » cbb81 333j 2000v polypropylene film capacitor supplier

cbb81 333j 2000v polypropylene film capacitor supplier

  • Series: CBB81
  • Error: ±5% (J) ±10% (K)
  • Voltage: 2000V
  • color: red
  • Application: General

Description

cbb81 333j 2000v polypropylene film capacitor supplier

cbb81 333j 2000v High-voltage polypropylene film capacitor, using polypropylene film as the medium, metallized film and aluminum foil as electrodes, internal string structure, flame-retardant epoxy resin encapsulation, flame-retardant performance reaches UL94V-0 level

  • Excellent frequency and temperature characteristics
  • Low loss, minimal internal temperature rise, reliability
  • Negative capacitance temperature coefficient and good stability
  • Specially designed for the line and reverse circuit of color TV monitors, suitable for high-pulse, high-current circuits

cbb81 333j 2000v polypropylene film capacitor supplier

ltem Characteristics
Reference standard GB 10190
Climatic Category 40/85/21
Rated Voltage 2000V
Capacitance 0.022UF
Capacitance Tolerance ±5%(J) ;±10%(K)
Voltage proof 2.0UR (2S)
Dissipation Factor ≤0.001 (20°C, 1KHz)
Insulation Resistance

≥25000MΩ

20°C,1min

Size of CBB81 Film Capacitor

Applications

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

Title

Go to Top