Home » Products » Factory supply 0.033μF CBB21 film capacitor is Suitable for circuit light group

Factory supply 0.033μF CBB21 film capacitor is Suitable for circuit light group

  • CBB21 Polypropylene Capacitor
  • 333J 250V FILM CAPACITOR
  • P=10.0mm
  • Capacitace Tolerance: ±5%(J)
  • Size(T*H*W): 5.5*10.5*13mm

Description

Factory supply 0.033μF CBB21 film capacitor is Suitable for circuit light group

0.033μF CBB21 film capacitor has the characteristics of small high-frequency penetration, small internal temperature rise, high insulation resistance, good self-healing and long life. Induction winding with metallized polypropylene film, flame retardant epoxy powder encapsulation, capacitors are used in demanding circuits of various AC, DC, AC and pulse circuits, suitable for color TV S that requires small size and excellent performance Correction circuit, large screen display and various high frequency and large current occasions.

Factory supply 0.033μF CBB21 film capacitor is Suitable for circuit light group

ltem Characteristics
Reference standard GB10188(IEC 60384-13)
Climatic Category 40/85/21
Rated Voltage 250V
Capacitance 0.033μF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR(2S)
Dissipation Factor ≤0.002(20℃,1KHz)
Insulation Resistance

≥100000MΩ

20°C,1min

Size of CBB21 333J 250V Film Capacitor

CBB21 333J 250V Film Capacitor

W: 13.0mm
H: 10.5mm
T: 5.5mm
P±1:10.0mm

 

FAQ

Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com

Title

Go to Top