- CBB21 Polypropylene Capacitor
- 103J 630V FILM CAPACITOR
- Capacitace Tolerance: ±5%(J)
- Size(T*H*W): 4.5*10*13mm
Professional customization CBB21 103J 630V film capacitor for energy saving lamp
CBB21 103J 630V film capacitor for energy saving lamp
CBB21 103J 630V film capacitor is wound with low loss, low internal temperature rise, good self-healing property and high pressure resistance.
CBB21 103J 630V film capacitors for energy saving lamp
|Reference standard||GB10188(IEC 60384-13)|
Size of CBB21 103J 630V Film Capacitor
CBB21 103J 630V Film Capacitor
Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?
A：Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.
Q: How to judge the quality of the film capacitor?
A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.
2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.
3) Do simulated life test.