Home » Products » Polyester film polyester capacitor CL11 1200V102J manufacturer

Polyester film polyester capacitor CL11 1200V102J manufacturer

  • Series: CL11
  • Error: ±5% (J)
  • Withstand voltage: 2UR (5s)
  • Electric capacity range: 0.001~0.47uf
  • Customized service: capacity, voltage, size, trademark


Polyester film polyester capacitor CL11 1200V102J

Polyester film polyester capacitor CL11 can be used in many ways. If the polyester capacitors are connected in parallel, the capacity can be increased, and if they are connected in series, the capacity can be adjusted.

Polyester film polyester capacitor CL11 1200V102J

ltem Characteristics
Reference standard GB6346 (IEC 60384-11)
Climatic Category 40/85/21
Rated Voltage 1200V
Capacitance 0.001µf
Capacitance Tolerance ±5%(J)
Voltage proof 2UR (5S)
Dissipation Factor ≤0.01 (20°C, 1KHz)
Insulation Resistance



Size of CL11 102J1200V Film Capacitor

CL11 film capacitor

CL11 102J1200V Film Capacitor
H: 14.0mm


Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com


    Go to Top

    Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home/xuanxcap/public_html/solidcapacitor.com/wp-includes/functions.php on line 5427