Home » Products » polypropylene film capacitors CBB21 224J630V factory wholesale

polypropylene film capacitors CBB21 224J630V factory wholesale

  • CBB21 Polypropylene Capacitor
  • P:20.0mm
  • Capacitace Tolerance: ±5%(J)
  • Size(T*H*W): 7.5*14.0*24.0mm


polypropylene film capacitors CBB21 224JV630V for electronic ballast

polypropylene film capacitors CBB21 is non-inductive structure,Flame-retardant epoxy resin encapsulation, CP wire is led out radially, low loss, low temperature rise, stable capacity, excellent insulation performance, and good self-healing characteristics,It is suitable for AC / DC, low-pulse circuits, and can be widely expanded in various electronic appliances such as display equipment, audio equipment, audio-visual equipment, communication equipment, and data transmission processing.

polypropylene film capacitors CBB21 224JV630V for electronic ballast

ltem Characteristics
Reference standard GB10188(IEC 60384-13)
Climatic Category 40/85/21
Rated Voltage 630V
Capacitance 0.22μF
Capacitance Tolerance ±5%(J)
Voltage proof 1.6UR(2S)
Dissipation Factor ≤0.002(20℃,1KHz)
Insulation Resistance



Size of CBB21 224J 630V Film Capacitor


CBB21 224J 630V Film Capacitor

W: 24.0mm
H: 14.0mm
T: 7.5mm





Q:Film capacitors have been wave soldered, lead-free soldered, about 200 degrees? High temperature can easily damage the capacitor or affect the life. Don’t know how this industry is controlled and handled? Is manual welding required? Is there a temperature limit in the capacitor specifications? Is the solder joint temperature or body temperature when labeling?

A:Hello, the temperature of the wave soldering peak of the film capacitor can be 275 ° C, which is also the temperature of the IEC standard, and the tin immersion time is 3S-5S. The other is the preheating temperature and time. Film capacitors can withstand this temperature. Does not affect electrical characteristics. The solderability temperature and soldering heat resistance temperature are stated in the specification approval book. The former is aimed at the solderability of capacitor pins, while the latter is about the influence of welding temperature on the characteristics of film capacitors.

Q: How to judge the quality of the film capacitor?

A: 1) Use a multimeter to test the resistance of the thin-film electricity. The two feet should be very high resistance. If there is a capacitance meter, measure whether the capacitance value matches the mark on the case.

2) Test performance at room temperature, including capacity, loss, insulation resistance, withstand voltage, ESR, etc.

3) Do simulated life test.

Contact Us

Email: filmcap@xuanxcapaciors.com

Ph/(whatsapp): +86-18825879082

Skype: Coco.PSH

Website: xuanxcapacitors.com


Go to Top

Notice: ob_end_flush(): failed to send buffer of zlib output compression (0) in /home/xuanxcap/public_html/solidcapacitor.com/wp-includes/functions.php on line 5427